klebermat.com
NYSTEIN Thermal Pad Flextein® S60F

NYSTEIN Thermal Pad Flextein® S60F

SKU: FLEXTEIN-S60F
Non-volatile 6.0 W/m·K super-soft pad designed for optical communication and high-reliability applications requiring contamination-free surfaces.

Key Features

  • Thermal conductivity 6.0 W/m· K
  • No volatile condensation
  • Super soft, high compression, high resilience
  • Highly Reliable, Repeatable
  • Available in thicknesses from 0.02" (0.5mm) to 0.40" (10.0mm)
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.
Property Unit Value Test Method
Appearance Light grey Visual
Thickness mm 0.5 to 10.0 ASTM D374
Thermal Conductivity W/m · K 6.0 ISO 22007-2
Hardness Shore OO 35 ASTM D2240
Density g/cm³ 3.1 ASTM D792
Dielectric Strength kV/mm ≥6.0 ASTM D149
Volume Resistivity Ω·cm ≥ 1.0 × 10¹² ASTM D257
Oil Penetration Rate % < 1.0 125℃&48h
Dielectric Constant 1MHz 6.5 ASTM D150
D3-D20 ppm 0 Nystein
Service Temp °C -40 to 150 Nystein
Flame Rating V-0 UL94
RoHS Yes Nystein
Specifications are subject to change without notice. Download TDS
Overview

Product Introduction

Flextein® S60F is a no volatile condensation, super soft and highly thermally conductive gap filler. It is produced without volatile condensation mist under 150°C & 24h test conditions, which is especially suitable for application scenarios with high requirements on volatiles, such as security, optical modules, drones and other industries. Its ultra-soft hardness enables it to obtain good compression characteristics and surface lamination effect under low pressure. The main component of the material is insulating ceramic powder filled with silicone rubber, which is a cost-effective thermal conductive interface filler material.
Use Cases

Applications

Security Cameras
No volatile condensation
Highly Reliable, Repeatable
Available in thicknesses from 0.02" (0.5mm) to 0.40" (10.0mm)
Options

Configuration

01

Standard size 470×470 mm, sheet form and die-cut parts could be required.

02

0.5 through 10.0 mm thick material available in 0.5mm increments.

03

Optional double-sided adhesive, can be backed according to demand

Handling

Storage

Sealed at room temperature away from light, and stored in a dry place.

Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.

The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.

For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.

Interested in NYSTEIN Thermal Pad Flextein® S60F?

Contact our AE team for samples, custom formulations, or technical support.