NYSTEIN Thermal Gel Flextein® TG892
SKU: FLEXTEIN-TG892
High-output 12.0 W/m·K thermal gel with low oil seepage and superior weather resistance for demanding automotive and power electronics.
Key Features
- Thermal conductivity 12.0 W/m · K
- High weather resistance and reliability
- Low oil seepage rate
- RoHS compliant
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | Grey | Visual | |
| Min. Used Thickness | mm | 0.2 | ASTM D374 |
| Extrusion rate | g/min | 30 | Nystein |
| Thermal Conductivity | W/m · K | 12.0 | ISO 22007-2 |
| Density | g/cm³ | 3.15 | ASTM D792 |
| Thermal Resistance | @50 psi °C·in²/W | 0.046 | ASTM D5470 |
| Dielectric Strength | kV/mm | ≥6.0 | ASTM D149 |
| D3-D20 | ppm | < 50 | Nystein |
| Volume Resistivity | Ω·cm | ≥ 1.0 × 10¹² | ASTM D257 |
| Oil Bleeding Rate | % | < 1.0 | 125℃&48h |
| Service Temp | °C | -40 to 150 | Nystein |
| Flame Rating | V-0 | 94 UL | |
| RoHS | Yes | Nystein |
Specifications are subject to change without notice.
Download TDS
Overview
Product Introduction
Flextein TG892 is a thermally conductive gel material with an ultra-high thermal conductivity of 12 W/m·K. Flextein TG892 can be used in different applications by dispensing and is perfectly adapted to the needs of production automation. Unlike thermally conductive silicone grease, Flextein TG892 thermally conductive gel is non-settling and non-flowing and is suitable for dispensing equipment.
Use Cases
Applications
Options
Configuration
01
30cc, 55cc, 300cc Syringe.
02
1kg, 10kg pail
Handling
Storage
Sealed at room temperature away from light, and stored in a dry place.
Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.
The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.
For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.