NYSTEIN Thermal Gel Flextein® TG880
SKU: FLEXTEIN-TG880
High-performance 8.0 W/m·K gel balancing very low mechanical stress with excellent weatherability for long-term power device reliability.
Key Features
- Thermal conductivity 8.0 W/m · K
- Perfect combination of very low stress and low thermal resistance
- High weatherability and reliability
- Easy dispensing, good mouldability
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | Grey | Visual | |
| Min. Used Thickness | mm | 0.2 | ASTM D374 |
| Extrusion rate | g/min | 20 | Nystein |
| Thermal Conductivity | W/m · K | 8.0 | ISO 22007-2 |
| Density | g/cm³ | 3.25 | ASTM D792 |
| Thermal Resistance | @50 psi °C·in²/W | 0.052 | ASTM D5470 |
| Dielectric Strength | kV/mm | ≥6.0 | ASTM D149 |
| Volume Resistivity | Ω·cm | ≥ 1.0 × 10¹² | ASTM D257 |
| Dielectric Constant | 1MHz | 8.5 | ASTM D150 |
| Service Temp | °C | -40 to 150 | Nystein |
| Flame Rating | V-0 | 94 UL | |
| RoHS | Yes | Nystein |
Specifications are subject to change without notice.
Download TDS
Overview
Product Introduction
Flextein TG880 is special designed for use in high performance devices requiring minimal thermal resistance for maximum thermal performance and component reliability. In addition to providing application flexibility and variable gap adaptation, TG880 will exert minimum stress on your component while maintaining interface contact to maximize thermal transfer. It requires no cure cycle and its cross-linked gel structure provides superior long term thermal stability and reliable performance over conventional greases.
Use Cases
Applications
Options
Configuration
01
30cc, 55cc, 300cc Syringe.
02
1kg, 10kg pail
Handling
Storage
Sealed at room temperature away from light, and stored in a dry place.
Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.
The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.
For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.