NYSTEIN Thermal Gel Flextein® TG803
SKU: FLEXTEIN-TG803
Easy-dispense 3.5 W/m·K thermal gel combining minimal thermal resistance with high reliability for automated assembly processes.
Key Features
- Thermal conductivity 3.5 W/m · K
- Ultra low thermal resistance
- Easy to dispense
- Ultra low compression force
- Long-term reliability
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | Pink | Visual | |
| Min. Used Thickness | mm | 0.15 | ASTM D374 |
| Extrusion rate | g/min | 22 | Nystein |
| Thermal Conductivity | W/m · K | 3.5 | ISO 22007-2 |
| Density | g/cm³ | 3.05 | ASTM D792 |
| Thermal Resistance | @50 psi °C·in²/W | 0.06 | ASTM D5470 |
| Dielectric Strength | kV/mm | ≥6.0 | ASTM D149 |
| TML (CVCM) | % | ≤0.15 (0.05) | ASTM E595 |
| Low volatility content (D4-D20) | ppm | <50 | Gas Chromatograph |
| Volume Resistivity | Ω·cm | ≥ 1.0 × 10¹² | ASTM D257 |
| Service Temp | °C | -40 to 150 | Nystein |
| Flame Rating | V-0 | 94 UL | |
| RoHS | Yes | Nystein |
Specifications are subject to change without notice.
Download TDS
Overview
Product Introduction
Flextein TG803 is special designed for use in high performance devices requiring minimal thermal resistance for maximum thermal performance and component reliability. It requires no cure cycle and can be readily re-worked. This compliant material requires low compression force to conform over irregular interfaces and can be applied to single devices with minimum bond-line thickness as well as to multiple devices with variable tolerances. The cross-linked gel structure provides superior long term thermal stability and reliable performance over conventional greases.
Use Cases
Applications
Options
Configuration
01
30cc, 55cc, 300cc Syringe.
02
1kg, 10kg pail
Handling
Storage
Sealed at room temperature away from light, and stored in a dry place.
Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.
The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.
For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.