klebermat.com
NYSTEIN GAP PAD Flextein® S8000

NYSTEIN GAP PAD Flextein® S8000

SKU: FLEXTEIN-S8000
Silicone-free 8.0 W/m·K gap pad delivering high thermal performance for power electronics in automotive and telecom platforms.

Key Features

  • Thermal conductivity 8.0 W/m· K
  • Available in thicknesses from 0.02"(0.50mm) to 0.16"(4.0mm)
  • Silicone free and RoHS Compliant
  • Naturally tacky & re-workable
  • UL. 94 V-0
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.
Property Unit Value Test Method
Appearance Grey Visual
Thickness mm 0.5 to 4.0 ASTM D374
Thermal Conductivity W/m · K 8.0 ISO 22007-2
Hardness Shore OO 70 ASTM D2240
Density g/cm³ 3.6 ASTM D792
Dielectric Strength kV/mm ≥6.0 ASTM D149
Volume Resistivity Ω·cm ≥ 1.0 × 10¹² ASTM D257
Dielectric Constant @1MHz 7.9 ASTM D150
Service Temp °C -40 to 125 Nystein
Flame Rating V-0 94 UL
RoHS Yes Nystein
Specifications are subject to change without notice. Download TDS
Overview

Product Introduction

Flextein S8000 silicone-free thermal conductive sheet is a product system for silicone-sensitive applications with low modulus, low volatiles, no oil penetration, and no contamination of wiring, making it highly adaptable to applications where silicon contamination is a concern (telecom, aerospace). It also has the characteristics of ultra-soft and high compression, which can cover the microscopic uneven surface and thus improve heat transfer by making full contact with the mating parts. Flextein S8000 has natural adhesion on both sides and can be attached to components without adhesive backing by simply pressing firmly during assembly.
Use Cases

Applications

Automotive Electronic Control Units (ECUs)
Available in thicknesses from 0.02"(0.50mm) to 0.16"(4.0mm)
Naturally tacky & re-workable
UL. 94 V-0
Options

Configuration

01

Standard size 230×230 mm, sheet form and die-cut parts could be required.

02

Standard thickness: 0.5mm (0.02") to 4mm (0.16") in 0.5mm (0.02") increments. Can be customized according to customer needs.

03

Natural tack on one or both side option

Handling

Storage

Sealed at room temperature away from light, and stored in a dry place.

Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.

The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.

For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.

Interested in NYSTEIN GAP PAD Flextein® S8000?

Contact our AE team for samples, custom formulations, or technical support.