NYSTEIN GAP PAD Flextein® S2000

SKU: FLEXTEIN-S2000

Silicone-free, RoHS-compliant 2.0 W/m·K gap pad suited for applications where outgassing and contamination are critical concerns.

Key Features

Thermal conductivity 2.0 W/m· K
Available in thicknesses from 0.02"(0.50mm) to 0.16"(4.0mm)
Silicone free and RoHS Compliant
Naturally tacky & re-workable
UL. 94 V-0

Response within 24 hours

Technical Data

Typical Properties

All values are typical and for reference only.

Property	Unit	Value	Test Method
Appearance		Pink	Visual
Thickness	mm	0.5 to 4.0	ASTM D374
Thermal Conductivity	W/m · K	2.0	ISO 22007-2
Hardness	Shore OO	70	ASTM D2240
Density	g/cm³	2.4	ASTM D792
Dielectric Strength	kV/mm	≥6.0	ASTM D149
Volume Resistivity	Ω·cm	≥ 1.0 × 10¹²	ASTM D257
Dielectric Constant	@1MHz	6.5	ASTM D150
Service Temp	°C	-40 to 125	Nystein
Flame Rating		V-0	94 UL
RoHS		Yes	Nystein

Specifications are subject to change without notice. Download TDS

Overview

Product Introduction

Flextein S2000 silicone-free thermal conductive sheet is a product system for silicone-sensitive applications with low modulus, low volatiles, no oil penetration, and no contamination of wiring, making it highly adaptable to applications where silicon contamination is a concern (telecom, aerospace). It also has the characteristics of ultra-soft and high compression, which can cover the microscopic uneven surface and thus improve heat transfer by making full contact with the mating parts. Flextein S2000 is naturally tacky on both sides requiring no additional adhesive coating.

Use Cases

Applications

Automotive Electronic Control Units (ECUs)

Available in thicknesses from 0.02"(0.50mm) to 0.16"(4.0mm)

Naturally tacky & re-workable

UL. 94 V-0

Options

Configuration

Standard size 230×230 mm, sheet form and die-cut parts could be required.

Standard thickness: 0.5mm (0.02") to 4mm (0.16") in 0.5mm (0.02") increments. Can be customized according to customer needs.

Natural tack on one or both side option

Handling

Storage

Sealed at room temperature away from light, and stored in a dry place.

Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12 months.

The materials taken out after opening may be contaminated during use, so please do not mix contaminated products with unopened products. Kleber assumes no responsibility for contaminated products or conditions other than the required storage conditions.

For additional information, please contact your appropriate sales, technical support, or customer service representative promptly.

Interested in NYSTEIN GAP PAD Flextein® S2000?

Contact our AE team for samples, custom formulations, or technical support.