klebermat.com
NYSTEIN GAP PAD Flextein® S15SS

NYSTEIN GAP PAD Flextein® S15SS

SKU: FLEXTEIN-S15SS
Low-stiffness, high-adhesion 1.5 W/m·K pad that conforms tightly to uneven surfaces, reducing contact resistance with minimal mounting force.

Key Features

  • Thermal conductivity1.5W/m· K
  • Low stiffness, high fit
  • High adhesion surface to reduce contact thermal resistance
  • Electrical insulation and V-0 flame retardant grade
  • Available in thicknesses from 0.012” (0.3mm) to 0.40 (10.0mm)
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.
Property Unit Value Test Method
Appearance Grey Visual
Thickness mm 0.3 to 10.0 ASTM D374
Thermal Conductivity W/m · K 1.5 ISO 22007-2
Hardness Shore OO 7 ASTM D2240
Density g/cm3 2.6 ASTM D792
Dielectric Strength kV/mm ≥6.0 ASTM D149
Volume Resistivity Ω ·cm ≥ 1.0 × 10¹³ ASTM D257
Dielectric Constant 1MHz 5.1 ASTM D150
Oil penetration rate % ＜1 125℃&48h
Service Temp °C -40 to 150 Nystein
Operating Temp °C -60 to 200 Nystein
Flame Rating V-0 94 UL
RoHS Yes Nystein
Specifications are subject to change without notice. Download TDS
Overview

Product Introduction

Flextein S15SS is a silicone polymer filled with a high thermal conductivity filler, which has a thermal conductivity of 1.5W/m.k and low density and low oil permeability. This product has a very high cost performance and is very suitable for new energy, energy storage and automotive electronics applications that require low density and low oil permeation.. Flextein S15SS has an ultra-soft shore OO 7 durometer and is available in double-sided adhesive, single-sided adhesive, and single-sided with substrate for easy die-cutting and assembly. Simply press the adhesive side gently against the device during assembly to secure it to the device without the need for adhesive backing.
Use Cases

Applications

Desktops, Laptops and Servers
Low stiffness, high fit
Electrical insulation and V-0 flame retardant grade
Available in thicknesses from 0.012” (0.3mm) to 0.40 (10.0mm)
Options

Configuration

01

Standard size 470×470 mm, sheet form and die-cut parts could be required.

02

Standard thickness: 0.3mm (0.012") to 10.0 mm (0.40") in 0.5mm (0.02") increments. Can be customized according to customer needs

03

Natural tack on one or both side option

Handling

Storage

Sealed at room temperature away from light, and stored in a dry place.

Best storage conditions: Temperature: 25℃ (±3), Humidity: 50% (±10), can be stored for 12months.

The materials taken out after opening may be contaminated during use, so please do notmix contaminated products with unopened products.Kleber assumes no responsibily for contaminated products or conditions other than the required storage conditions.

For additional information, please contact your appropriate sales, technical support, orcustomer service representative promptly.

Interested in NYSTEIN GAP PAD Flextein® S15SS?

Contact our AE team for samples, custom formulations, or technical support.