klebermat.com

KLEBER · Application Materials

FLEXTEIN-S10001

Silicone-Free Thermal Gap Pad

English Technical Data Sheet

NYSTEIN GAP PAD Flextein® S10001

SKU: FLEXTEIN-S10001
Silicone-free 10.0 W/m·K thermal gap pad for silicone-sensitive applications, with 0.5-4.0 mm thickness options and natural tack on both sides.

Key Features

  • Thermal conductivity: 10.0 W/m·K
  • Silicone-free substrate for silicone-sensitive applications
  • Thickness: 0.5-4.0 mm
  • Natural tack on both sides
  • Flame rating: UL 94 V-0 (as stated in TDS)
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Appearance - Dark grey Visual
Thickness mm 0.5 to 4.0 ASTM D374
Thermal Conductivity W/m·K 10.0 ISO 22007-2
Hardness Shore OO 40 ASTM D2240
Density g/cm³ 3.5 ASTM D792
Dielectric Strength kV/mm ≥6.0 ASTM D149
Volume Resistivity Ω·cm ≥1.0 × 10¹⁰ ASTM D257
Dielectric Constant @1MHz 7.9 ASTM D150
Service Temperature °C -40 to 125 Nystein
Flame Rating - V-0 94 UL
RoHS - Yes Nystein
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

Flextein® S10001 is a silicone-free thermally conductive sheet designed for silicone-sensitive applications. The TDS describes a low-modulus, low-volatility material that conforms to mating surfaces under compression to support thermal contact.
The material provides 10.0 W/m·K thermal conductivity, natural tack on both sides and a customizable thickness range of 0.5-4.0 mm. Typical values below are taken from the supplied English TDS, revision A1.0. Application suitability should be verified for the intended assembly.
Use Cases

Applications

Silicone-free environments and silicone-sensitive applications
Optical communication modules and optical signal equipment
Projection equipment and optical control equipment
Advanced industrial control
Medical electronics and aerospace
Options

Configuration

01

Standard sheet size: 230 × 230 mm. Sheet form and die-cut parts are available on request.

02

Standard thickness: 0.5-4.0 mm in 0.5 mm increments; custom requirements can be discussed.

03

Natural tack on both sides; adhesive backing or PI film is available on request.

04

Ordering options: no suffix for double-sided tack; D1 for single-sided tack; A1 for single-sided adhesive. R: rectangular; IR: irregular.

Handling

Storage

Keep sealed in a dry place at room temperature, away from light.

Recommended storage conditions: 25°C (±3°C) and 50% (±10%) relative humidity; storage period: 12 months.

Do not mix material contaminated during use with unopened products. Contact KLEBER for additional storage and handling guidance.

Interested in NYSTEIN GAP PAD Flextein® S10001?

Contact our AE team for samples, custom formulations, or technical support.