klebermat.com
NYS-SORBER KTP10004 injection molding absorber — product photograph from English TDS Rev. A1.1

NYS-SORBER® KTP10004

SKU: KTP10004
PBT-based injection-moldable microwave absorbing material for complex structures and millimeter-wave applications.

Key Features

  • PBT-based, injection-moldable absorbing material
  • Low density: 1.45 g/cm³
  • High-loss material for broadband applications
  • Operating temperature: -50 to +160 °C
  • UL 94 V-0 flammability rating
  • RoHS and REACH compliance stated in the supplied TDS
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Color — Black Visual
Resin System — PBT —
Permittivity ε′ (77 GHz) — 7.90 SJ 20512-1995
Permittivity ε″ (77 GHz) — 1.42 SJ 20512-1995
Free Space Method — S21, 2 mm (77 GHz) dB -7.58 NYDG-70/90 (Transmission method)
Insertion Loss (77 GHz) dB/cm 77 Transmission method
Thermal Conductivity W/(m·K) 0.28 ISO 22007-2
Volume Resistivity Ω·cm 10⁶ ASTM D257
Hardness Shore D 75 ASTM D2240
Density g/cm³ 1.45 ASTM D792
Flammability — V-0 UL 94
Melting Point °C 210 —
Working Temperature °C -50 to +160 ASTM D1329
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

NYS-SORBER® KTP10004 is a PBT-based injection molding absorber for complex mechanical geometries and efficient high-volume production, primarily in the millimeter-wave RF range. The NYS-SORBER® KTP series combines polymer carriers with specially formulated magnetic ferrite fillers to help improve antenna patterns and reduce intracavity resonance.
KTP10004 offers a wide working temperature range, oil resistance and UL 94 V-0 flammability performance. The English TDS describes absorption performance at incident angles greater than 65 degrees. Suitability must be evaluated under the actual application and processing conditions.
Typical properties are reproduced from the English TDS, revision A1.1. Frequency and specimen thickness are included where specified. Free-space S21 for a 2 mm specimen and insertion loss expressed in dB/cm are separate reported measurements and should not be treated as interchangeable. Refer to the English TDS for the complete frequency-response curves.
Use Cases

Applications

Millimeter-wave antenna structures: radiation-pattern improvement
Complex injection-molded structures: cavity-resonance reduction

Interested in NYS-SORBER® KTP10004?

Contact our AE team for samples, custom formulations, or technical support.