NYS-SEALOR® SR 300
SKU: SR 300
A silicone sealing elastomer for environmental sealing, electrical insulation and mechanical protection over a wide temperature range.
Key Features
- Non-conductive silicone
- Working temperature: -55 to +170 °C
- Flexible with high mechanical strength
- Custom hoses, gaskets and molded rings
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Resin System | - | Silicone | - |
| Hardness | Shore A | 30~70 | ASTM D2240 |
| Density | g/cm³ | 1.2 | ASTM D792 |
| Tensile Strength | PSI | 900 | ASTM D412 |
| Elongation | % | 300 | ASTM D412 |
| Tear Strength | PPI | 60 | ASTM D624 |
| Compression Set | % | 30 | ASTM D395 |
| Working Temperature | °C | -55~+170 | ASTM D1329 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A silicone sealing elastomer for environmental sealing, electrical insulation and mechanical protection over a wide temperature range.
Typical properties are reproduced from the supplied English data sheet, revision A1.0. Values are typical, for reference only. Refer to the complete data sheet for test conditions, curves and processing information. Evaluate suitability under actual application conditions.
Typical properties are reproduced from the supplied English data sheet, revision A1.0. Values are typical, for reference only. Refer to the complete data sheet for test conditions, curves and processing information. Evaluate suitability under actual application conditions.
Use Cases