klebermat.com

NYS-SEALOR® COE 601

SKU: COE 601
A co-extruded gasket combining conductive and non-conductive elements in one profile for EMI shielding and environmental sealing.

Key Features

  • Dual conductive and sealing elements
  • Low outgassing
  • Working temperature: -55 to +170 °C
  • Custom profile options shown in the data sheet
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Binder (conductive) - ECE 501 -
Binder (non-conductive) - SR 300 -
Conductive Particle (conductive) - Ag/Al -
Hardness (conductive) Shore A 65 ASTM D2240
Hardness (non-conductive) Shore A 55 ASTM D2240
Density (conductive) g/cm³ 2.2 ASTM D792
Density (non-conductive) g/cm³ 1.2 ASTM D792
Volume Resistivity (conductive) Ω·cm 0.008 MIL-DTL-83528C
Tensile Strength (conductive) PSI 180 ASTM D412
Tensile Strength (non-conductive) PSI 900 ASTM D412
Elongation (conductive) % 150 ASTM D412
Elongation (non-conductive) % 300 ASTM D412
Tear Strength (conductive) PPI 30 ASTM D624
Tear Strength (non-conductive) PPI 60 ASTM D624
Shielding Effectiveness (500 MHz, conductive) dB 110 MIL-DTL-83528C
Shielding Effectiveness (2 GHz, conductive) dB 105 MIL-DTL-83528C
Shielding Effectiveness (18 GHz, conductive) dB 100 MIL-DTL-83528C
Working Temperature °C -55~+170 ASTM D1329
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

A co-extruded gasket combining conductive and non-conductive elements in one profile for EMI shielding and environmental sealing.
Typical properties are reproduced from the supplied English data sheet, revision A1.0. Values are typical, for reference only. Refer to the complete data sheet for test conditions, curves and processing information. Evaluate suitability under actual application conditions.
Use Cases

Applications

EMI shielding and environmental sealing

Interested in NYS-SEALOR® COE 601?

Contact our AE team for samples, custom formulations, or technical support.