NYS-CURE® SG-701
SKU: SG-701
A single-component, non-slump silicone gasket material applied by automated form-in-place dispensing for environmental sealing. This material is non-conductive.
Key Features
- Room temperature moisture curing
- Soft and flexible
- Adhesion to metal and plastic surfaces
- Low compression set
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Color | - | White | Visual |
| Resin System | - | Single component Silicone | - |
| Hardness | Shore A | 25 | ASTM D2240 |
| Density | g/cm³ | 1.2 | ASTM D792 |
| Compression Set | % | <20 | ASTM D395 |
| Adhesion Strength | N/cm | >10 | QA-WI-054 |
| Tensile Strength | MPa | 4.5 | ASTM D412 |
| Curing Mechanism | - | Moisture | - |
| Curing Condition | °C | 25 | - |
| Curing Time | H | 12 | - |
| Storage Condition | - | -30°C~-10°C, 3 Months | - |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A single-component, non-slump silicone gasket material applied by automated form-in-place dispensing for environmental sealing. This material is non-conductive.
Typical properties are reproduced from the supplied English data sheet, revision A1.0. Values are typical, for reference only. Refer to the complete data sheet for test conditions, curves and processing information. Evaluate suitability under actual application conditions.
Typical properties are reproduced from the supplied English data sheet, revision A1.0. Values are typical, for reference only. Refer to the complete data sheet for test conditions, curves and processing information. Evaluate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Store at -30 to -10 °C; shelf life: 3 months.