KB-XERM UE0805
SKU: UE0805
A two-component urethane encapsulant for electronic assemblies, combining heat transfer with encapsulation protection.
Key Features
- Two-component urethane system
- Thermal conductivity: 0.8 W/(m·K)
- Easy mixing and application
- For electronic encapsulation
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: Black liquid; Part B: Brown liquid; Mixed: Black liquid | - |
| Viscosity @ 25°C | cps | Part A: 10000-12000; Part B: 4000-5000; Mixed: 6000-8000 | - |
| Specific Gravity | g/cm³ | Part A: 1.54; Part B: 1.40; Mixed: 1.50 | - |
| Mix Ratio by Weight | - | 100:23 (A:B) | - |
| Mix Ratio by Volume | - | 100:25 (A:B) | - |
| Working Life @ 25°C | min | 3-5 | - |
| Gel Time @ 25°C | min | 15 | - |
| Thermal Conductivity | W/(m·K) | 0.8 | ASTM D5470 |
| Hardness | Shore A | 85 | ASTM D2240 |
| Tensile Strength | MPa | 5 | ASTM D638 |
| Elongation at Break | % | 40 | ASTM D638 |
| Volume Resistivity @ 25°C | Ω·cm | 1 × 10¹⁴ | ASTM D257 |
| Dielectric Strength | kV/mm | 20 | ASTM D149 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component urethane encapsulant for electronic assemblies, combining heat transfer with encapsulation protection.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
The supplied TDS gives different room-temperature cure durations in its table and process instructions. Confirm the required cure schedule with KLEBER application engineering before use.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
The supplied TDS gives different room-temperature cure durations in its table and process instructions. Confirm the required cure schedule with KLEBER application engineering before use.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture at 10-25°C in the original unopened container. Protect opened components from moisture with dry nitrogen.