klebermat.com

KLEBER · Application Materials

SE3030 LV

Potting & Encapsulants

English Technical Data Sheet

KB-XERM SE3030 LV

SKU: SE3030 LV
A two-component silicone encapsulant for thermal management and protection of electrical and electronic assemblies.

Key Features

  • Two-component silicone encapsulant
  • Room- or elevated-temperature curing
  • Low exotherm and stress
  • Thermal conductivity for electronic encapsulation
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Viscosity @ 25°C cps Part A: 7000-10000; Part B: 7000-10000; Mixed: 7000-10000 -
Specific Gravity g/cm³ Part A: 3.00; Part B: 3.00; Mixed: 3.00 -
Mix Ratio by Volume - 1:1 (A:B) -
Mix Ratio by Weight - 1:1 (A:B) -
Working Life @ 25°C min 30 -
Gel Time @ 80°C min 4-6 -
Curing Time @ 25°C h 24 -
Curing Time @ 80°C min 30 -
Thermal Conductivity W/(m·K) 3.0 ASTM D5470
Hardness Shore A 55 ASTM D2240
Tensile Strength MPa 1.0 ASTM D638
Elongation at Break % 20 ASTM D638
Volume Resistivity @ 25°C Ω·cm 1 × 10¹⁴ ASTM D257
Dielectric Strength kV/mm >13 ASTM D149
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

A two-component silicone encapsulant for thermal management and protection of electrical and electronic assemblies.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases

Applications

On-board chargers
Power modules
Automotive electronics
Communication components
Handling

Storage

Shelf life: 6 months from manufacture, stored at 10-25°C in the original unopened container. Invert the packaging container periodically to reduce settling.

Interested in KB-XERM SE3030 LV?

Contact our AE team for samples, custom formulations, or technical support.