KB-XERM SE2030S
SKU: SE2030S
A two-component silicone encapsulant for thermal management and protection of electrical and electronic assemblies.
Key Features
- Two-component silicone encapsulant
- Room- or elevated-temperature curing
- Low exotherm and stress
- Thermal conductivity for electronic encapsulation
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Viscosity @ 25°C | cps | Part A: 5500; Part B: 5000; Mixed: 5000 | - |
| Specific Gravity | g/cm³ | Part A: 2.74; Part B: 2.74; Mixed: 2.74 | - |
| Mix Ratio by Volume | - | 1:1 (A:B) | - |
| Mix Ratio by Weight | - | 1:1 (A:B) | - |
| Working Life @ 25°C | min | 30 | - |
| Gel Time @ 80°C | min | 4-6 | - |
| Curing Time @ 25°C | h | 24 | - |
| Curing Time @ 80°C | min | 30 | - |
| Thermal Conductivity | W/(m·K) | 2.0 | ASTM D5470 |
| Hardness | Shore A | 20 | ASTM D2240 |
| Tensile Strength | MPa | 0.20 | ASTM D638 |
| Elongation at Break | % | 15 | ASTM D638 |
| Volume Resistivity @ 25°C | Ω·cm | 1 × 10¹⁴ | ASTM D257 |
| Dielectric Strength | kV/mm | >12 | ASTM D149 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component silicone encapsulant for thermal management and protection of electrical and electronic assemblies.
Typical properties are reproduced from the supplied English TDS, A1.1. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, A1.1. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture, stored at 10-25°C in the original unopened container. Invert the packaging container periodically to reduce settling.