klebermat.com

KLEBER · Application Materials

EP1360/D25

Potting & Encapsulants

English Technical Data Sheet

KB-XERM EP1360/D25

SKU: EP1360/D25
A two-component epoxy encapsulant for electronic applications, providing heat transfer and bonding with room- or elevated-temperature curing.

Key Features

  • Two-component epoxy system
  • Thermal conductivity: 1.3 W/(m·K)
  • Low mixed viscosity for application
  • Room- or elevated-temperature curing
  • Temperature range: -40°C to +125°C (TDS)
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Appearance - Part A: Gray liquid; Part B: Transparent liquid; Mixed: Gray liquid -
Viscosity @ 25°C cps Part A: 50000-70000; Part B: 50-150; Mixed: 3000-5000 -
Specific Gravity g/cm³ Part A: 2.00; Part B: 1.00; Mixed: 1.82 -
Mix Ratio by Weight - 10:1 (A:B) -
Working Life @ 25°C min 40-60 -
Gel Time @ 25°C h 2 -
Curing Time @ 25°C h 24 -
Curing Time @ 65°C min 45-50 -
Curing Time @ 125°C min 15-20 -
Thermal Conductivity W/(m·K) 1.3 ASTM D5470
Hardness Shore D 84 ASTM D2240
Lap Shear Strength, Aluminum @ 25°C MPa 14 ASTM D1002
Tensile Strength MPa 32 ASTM D638
Elongation at Break % 3 ASTM D638
Glass Transition Temperature °C 65 DMA
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

A two-component epoxy encapsulant for electronic applications, providing heat transfer and bonding with room- or elevated-temperature curing.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases

Applications

Heat pipe bonding
Handling

Storage

Shelf life: 1 year from manufacture, stored at 15-30°C in the original unopened container.

Interested in KB-XERM EP1360/D25?

Contact our AE team for samples, custom formulations, or technical support.