klebermat.com

KLEBER · Application Materials

EA3030

Structural Adhesives

English Technical Data Sheet

KB-XERM EA3030

SKU: EA3030
A two-component thermally conductive epoxy adhesive for electronic and general applications requiring bonding and heat transfer.

Key Features

  • Two-component thermally conductive epoxy
  • Thermal conductivity: 3.0 W/(m·K)
  • Room- or elevated-temperature curing
  • Low exotherm and stress during curing
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Appearance - Part A: Blue paste; Part B: White paste; Mixed: Light blue paste -
Viscosity @ 25°C, 10 s⁻¹ Pa·s Part A: 100-200; Part B: 50-200; Mixed: 100-200 -
Specific Gravity g/cm³ Part A: 2.94; Part B: 2.81; Mixed: 2.87 -
Mix Ratio by Volume - 1:1 (A:B) -
Mix Ratio by Weight - 100:95 (A:B) -
Working Time @ 25°C min 20-30 -
Time to Handling Strength @ 25°C h 6-8 -
Curing Time (mixed) - 25°C: 2-3 days; 80°C: 1-2 h -
Thermal Conductivity W/(m·K) 3.0 ASTM D5470
Hardness Shore D 85 ASTM D2240
Lap Shear Strength, Aluminum @ 25°C MPa >11 ASTM D1002
Tensile Strength MPa 20 ASTM D638
Elongation at Break % 1 ASTM D638
Glass Transition Temperature °C 80 DMA
Dielectric Strength kV/mm 14 ASTM D149
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

A two-component thermally conductive epoxy adhesive for electronic and general applications requiring bonding and heat transfer.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases

Applications

Battery pack assemblies
Communication electronics
Handling

Storage

Shelf life: 1 year from manufacture at 15-30°C in the original unopened container.

Interested in KB-XERM EA3030?

Contact our AE team for samples, custom formulations, or technical support.