KB-XERM EA2030 F
SKU: EA2030 F
A two-component thermally conductive epoxy adhesive for electronic and general applications requiring bonding and heat transfer.
Key Features
- Two-component thermally conductive epoxy
- Thermal conductivity: 2.0 W/(m·K)
- Room- or elevated-temperature curing
- Low exotherm and stress during curing
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: White fluid; Part B: Black fluid; Mixed: Gray fluid | - |
| Viscosity @ 25°C | mPa·s | Part A: 30000-60000; Part B: 30000-60000; Mixed: 30000-60000 | - |
| Specific Gravity | g/cm³ | Part A: 2.65; Part B: 2.50; Mixed: 2.58 | - |
| Mix Ratio by Weight | - | 100:46 (A:B) | - |
| Working Time @ 25°C | min | 20-30 | - |
| Time to Handling Strength @ 25°C | h | 6-8 | - |
| Curing Time @ 25°C | days | 2-3 | - |
| Curing Time @ 80°C | h | 1-2 | - |
| Thermal Conductivity | W/(m·K) | 2.0 | ASTM D5470 |
| Hardness | Shore D | 90 | ASTM D2240 |
| Lap Shear Strength, Aluminum @ 25°C | MPa | ≥10 | ASTM D1002 |
| Tensile Strength | MPa | 20 | ASTM D638 |
| Elongation at Break | % | 0.8-1 | ASTM D638 |
| Glass Transition Temperature | °C | 80 | DMA |
| Dielectric Strength | kV/mm | 12 | ASTM D149 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component thermally conductive epoxy adhesive for electronic and general applications requiring bonding and heat transfer.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
The supplied TDS contains conflicting volume mix ratios. Confirm the correct mixing instructions with KLEBER application engineering before use.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
The supplied TDS contains conflicting volume mix ratios. Confirm the correct mixing instructions with KLEBER application engineering before use.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture at 5-10°C in the original unopened container.