KB-XERM AA1003
SKU: AA1003
A two-component acrylic adhesive combining thermal conductivity and adhesion for electronic applications, with fast room-temperature curing without primer.
Key Features
- Fast room-temperature curing
- Thermal conductivity: 1.0 W/(m·K)
- Bonding and thermal management
- Easy mixing and application
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: Blue paste; Part B: Off-white paste; Mixed: Blue paste | - |
| Viscosity @ 25°C | Pa·s | Part A: 200-400; Part B: 200-400 | - |
| Specific Gravity | g/cm³ | Part A: 1.65; Part B: 1.75; Mixed: 1.67 | - |
| Mix Ratio by Volume | - | 4:1 (A:B) | - |
| Working Time @ 25°C | min | 3 | - |
| Time to Handling Strength @ 25°C | min | 6-10 | - |
| Full Cure Time @ 25°C | h | 2-3 | - |
| Thermal Conductivity | W/(m·K) | 1.0 | ASTM D5470 |
| Hardness | Shore D | 60 | ASTM D2240 |
| Lap Shear Strength, Aluminum @ 25°C | MPa | 10 | ASTM D1002 |
| Glass Transition Temperature | °C | 80 | DMA |
| Dielectric Strength | kV/mm | 18 | ASTM D149 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component acrylic adhesive combining thermal conductivity and adhesion for electronic applications, with fast room-temperature curing without primer.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture at 4-10°C in the original unopened container. Do not return dispensed adhesive to the original container.