KB-XBOND UA310
SKU: UA310
A two-component urethane adhesive for bonding PET blue film and aluminum plate, with room- or elevated-temperature curing.
Key Features
- PET film and aluminum bonding
- Two-component urethane system
- Thermal conductivity: 0.5 W/(m·K)
- Room- or elevated-temperature curing
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: White paste; Part B: Black paste; Mixed: Gray paste | - |
| Viscosity @ 25°C | Pa·s | Part A: 50; Part B: 80; Mixed: 70 | - |
| Specific Gravity | g/cm³ | Part A: 1.25; Part B: 1.82; Mixed: 1.53 | - |
| Mix Ratio by Volume | - | 1:1 (A:B) | - |
| Working Time @ 25°C | min | 7-10 | - |
| Time to Handling Strength @ 25°C | h | 1-2 | - |
| Hardness | Shore D | 70 | ASTM D2240 |
| Thermal Conductivity | W/(m·K) | 0.5 | ASTM D5470 |
| Lap Shear Strength, Aluminum @ 25°C | MPa | 10 | ASTM D1002 |
| Lap Shear Strength, PET film/PET film @ 25°C | MPa | 1.5 / PET film destruction | ASTM D1002 |
| Tensile Strength | MPa | 12 | ASTM D638 |
| Elongation at Break | % | 1-5 | ASTM D638 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component urethane adhesive for bonding PET blue film and aluminum plate, with room- or elevated-temperature curing.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture at 15-30°C in the original unopened container. Protect opened components from moisture with dry nitrogen.