klebermat.com

KLEBER · Application Materials

AA510

Structural Adhesives

English Technical Data Sheet

KB-XBOND AA510

SKU: AA510
A low-shrinkage two-component acrylic adhesive for metals such as aluminum, cold-rolled steel and galvanized steel, and engineering plastics such as PC/ABS.

Key Features

  • Low-shrinkage formulation
  • Thixotropic, non-flowing application
  • Bonding to metals and PC/ABS
  • Two-component acrylic system
Response within 24 hours
Technical Data

Typical Properties

All values are typical and for reference only.

Swipe horizontally to view all technical data.

Property Unit Value Test Method
Appearance - Part A: Black paste; Part B: Gray paste; Mixed: Dark gray paste -
Viscosity @ 25°C Pa·s Part A: 100-200; Part B: 100-300 -
Specific Gravity g/cm³ Part A: 0.95; Part B: 1.65; Mixed: 1.20 -
Mix Ratio by Volume - 2:1 (A:B) -
Working Time @ 25°C min 6-8 -
Time to Handling Strength @ 25°C min 18-25 -
Lap Shear Strength, Aluminum @ 25°C MPa >6 ASTM D1002
Lap Shear Strength, PC/ABS @ 25°C MPa SB (as reported in TDS) ASTM D1002
Tensile Strength MPa 6 ASTM D638
Elongation at Break % 190 ASTM D638
Glass Transition Temperature °C 43 DMA
Specifications are subject to change without notice. Download English TDS (PDF)
Overview

Product Introduction

A low-shrinkage two-component acrylic adhesive for metals such as aluminum, cold-rolled steel and galvanized steel, and engineering plastics such as PC/ABS.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases

Applications

Automotive
Buses
Rail transit
Handling

Storage

Shelf life: 6 months in the original unopened container below 25°C. Storage at 4-10°C is recommended. Allow cold product to return to room temperature before use; protect from direct sunlight.

Interested in KB-XBOND AA510?

Contact our AE team for samples, custom formulations, or technical support.