KB-XBOND AA230
SKU: AA230
A two-component acrylic adhesive for automotive sheet-metal bonding, including aluminum alloy, electrogalvanized steel, hot-dip galvanized steel and cold-rolled steel.
Key Features
- Automotive sheet-metal bonding
- Oil-surface bonding resistance described in TDS
- High impact resistance
- Room-temperature initial cure followed by bake curing
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: Off-white paste; Part B: Gray paste; Mixed: Gray paste | - |
| Viscosity @ 25°C | Pa·s | Part A: 200-400; Part B: 200-400; Mixed: 200-400 | - |
| Specific Gravity | g/cm³ | Part A: 1.18; Part B: 1.49 | - |
| Mix Ratio by Volume | - | 4:1 (A:B) | - |
| Working Time @ 25°C | min | 15-20 | - |
| Curing Schedule (two stages) | - | 25°C × 60 min, then 170°C × 20 min | - |
| Lap Shear Strength, Aluminum @ 25°C (after bake curing) | MPa | >13 | ASTM D1002 |
| T-Peel Strength, Aluminum @ 25°C (after bake curing) | N/mm | >4 | ASTM D1876 |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component acrylic adhesive for automotive sheet-metal bonding, including aluminum alloy, electrogalvanized steel, hot-dip galvanized steel and cold-rolled steel.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, A1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months from manufacture below 25°C in the original unopened container.