KB-XBOND AA107
SKU: AA107
A two-component acrylic adhesive for bonding metal materials, with rapid curing at room temperature.
Key Features
- Two-component acrylic adhesive
- Metal bonding
- Impact resistance
- Rapid room-temperature curing
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: Off-white paste; Part B: Gray paste; Mixed: Gray paste | - |
| Viscosity @ 25°C | Pa·s | Part A: 100-300; Part B: 100-300; Mixed: 100-300 | - |
| Specific Gravity | g/cm³ | Part A: 1.04; Part B: 1.56 | - |
| Mix Ratio by Volume | - | 4:1 (A:B) | - |
| Working Time @ 25°C | min | 7-9 | - |
| Time to Handling Strength @ 25°C | min | 20-25 | - |
| Lap Shear Strength, Aluminum @ 25°C | MPa | 18 | ASTM D1002 |
| Lap Shear Strength, FRP @ 25°C | MPa | 8.5 | ASTM D1002 |
| T-Peel Strength, Aluminum @ 25°C | N/mm | 7.0 | ASTM D1876 |
| Tensile Strength | MPa | 19 | ASTM D638 |
| Elongation at Break | % | 15-20 | ASTM D638 |
| Glass Transition Temperature | °C | 90 | DMA |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
A two-component acrylic adhesive for bonding metal materials, with rapid curing at room temperature.
Typical properties are reproduced from the supplied English TDS, A1.1. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, A1.1. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months in the original unopened container below 25°C. Storage at 4-10°C is recommended. Allow cold product to return to room temperature before use; protect from direct sunlight.