ColdJoin™ AA550
SKU: AA550
An impact-resistant, two-component epoxy-modified acrylic structural adhesive for automotive body assembly and vehicle repair, with rapid room-temperature curing.
Key Features
- Bonding to automotive steel and aluminum sheets
- Two-component epoxy-modified acrylic formulation
- Compatible with mechanical fastening processes
- Rapid room-temperature curing
Response within 24 hours
Technical Data
Typical Properties
All values are typical and for reference only.Swipe horizontally to view all technical data.
| Property | Unit | Value | Test Method |
|---|---|---|---|
| Appearance | - | Part A: Amber paste; Part B: Red paste; Mixed: Red paste | - |
| Viscosity @ 25°C | Pa·s | Part A: 150-300; Part B: 300-500 | - |
| Specific Gravity | g/cm³ | Part A: 0.95-1.00; Part B: 1.25-1.30 | - |
| Mix Ratio by Volume | - | 10:1 (A:B) | - |
| Working Time @ 25°C | min | 6-8 | - |
| Handling Time @ 25°C | min | 18-24 | - |
| Lap Shear Strength, Aluminum @ 25°C | MPa | 17 | ASTM D1002 |
| T-Peel Strength, Aluminum @ 25°C | N/mm | 7 | ASTM D1876 |
| Tensile Strength | MPa | 18 | ASTM D638 |
| Elongation at Break | % | 100 | ASTM D638 |
| Glass Transition Temperature (Tg) | °C | 80 | DMA |
Specifications are subject to change without notice.
Download English TDS (PDF)
Overview
Product Introduction
An impact-resistant, two-component epoxy-modified acrylic structural adhesive for automotive body assembly and vehicle repair, with rapid room-temperature curing.
Typical properties are reproduced from the supplied English TDS, V1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Typical properties are reproduced from the supplied English TDS, V1.0. Values are typical and for reference only; validate suitability under actual application conditions.
Use Cases
Applications
Handling
Storage
Shelf life: 6 months in the original unopened container at 25°C. Storage at 4-10°C is recommended. Allow refrigerated product to return to room temperature before use. Avoid direct sunlight, open flames and high-temperature sources.